Skip to content
Allanson RSS296AT-120-277V Ballast pour fluorescents 

Allanson RSS1648-26L-208-347V Ballast for fluorescents

SKU BAL.RSS1648-347V
by Allanson

This ballast is the 208 to 347V input version of the popular RSS1648-26L. It is used to power HO type fluorescent tubes

  • Direct replacement for ferromagnetic ballasts (no rewiring required)
  • For use with T12 HO, T8 HO (2′ to 10′ length)
  • 3 RSS ballasts replace 15 existing models for less inventory requirements
  • A smaller profile allows for greater adaptability for low profile signage
  • Fully operational in all conditions (Rated “A”)
  • Conventional serial wiring
  • Cold weather starts at -30°C
  • FCC compliant, low RFI and EMI ensuring no interference
  • Complies with ANSI C82.11 standards
  • Less than 8% THD for confident installation
  • Thermal protection
  • Increased lamp life
  • Approved: cULus

For use with T8 HO and T12 HO lamps.

For use with T12 HO and Slimline lamps

SKU Number of lamps Video by circuit Combined total video Input voltage Maximum Input Amps Maximum Input Watts Open circuit voltage
RSS296AT-120-277V 1-2 4′-16′ 4′-16′ 120-277V 1.50-0.71 180-176 950
RSS496AT-120-277V 2-4 4′-16′ 8′-32′ 120-277V 3:00 p.m.-1:42 p.m. 360-352 950
RSS696AT-120-277V 4-6 12′-24′ 24′-48′ 120-277V 3.85-188 460-456 950

For use with T8 HO and Slimline lamps

SKU Number of lamps Video by circuit Combined total video Input voltage Maximum Input Amps Maximum Input Watts Open circuit voltage
RSS296AT-120-277V 1-2 4′-12′ 4′-12′ 120-277V 1.40-0.64 166-162 950
RSS496AT-120-277V 2-4 4′-12′ 8′-24′ 120-277V 2.85-1.38 330-324 950
RSS696AT-120-277V 4-6 9′-18′ 18′-36′ 120-277V 3.82-186 454-450 950